1 3

Hosolee

Archery Points Arrowheads ID 4.20mm/0.204inch Shafts Insert Arrow Tips

Archery Points Arrowheads ID 4.20mm/0.204inch Shafts Insert Arrow Tips

$0.83 USD
$0.83 USD
Sale Sold out
重量
Product Information 4.20 Stainless Steel Target Points · 80/100/120 gr · 12 Pack

Precision-machined 303 stainless steel insert points for ID 4.20mm arrows. Bullet-shaped tip, grooved press-fit tail, and a cut-to-weight section so you can fine-tune your arrow's front-of-center. Three weights — 80, 100, and 120 grain — twelve per pack.

Stainless steel bullet target point mounted on a carbon arrow shaft with three loose points in 80 100 and 120 grain arranged diagonally on white background
303 stainless steel · ID 4.20mm fit · press-fit grooved tail
Size comparison chart of 80 grain 48.5mm 100 grain 54.7mm and 120 grain 66.9mm stainless target points next to a precision ruler
01 — Three Weights

80, 100, or 120 Grain

Match the point weight to your shaft spine, draw weight, and target distance. Longer points for heavier front-of-center, shorter points for faster arrows. All share the same 4.20mm press-fit tail.

  • 80 gr — 48.5mm long, light and fast
  • 100 gr — 54.7mm long, the all-rounder
  • 120 gr — 66.9mm long, heavy FOC for stabilization
02 — Cut-to-Weight Tail

Trim It to Your Gram

The grooved tail sections let you dial in exact point weight — each groove step is about 10 grains. Cut one section off to drop 10 grains, two sections for 20. Consistent groups start with consistent front weight.

  • 4.20mm press-fit tail, locks into ID 4.20mm shafts
  • 6.00mm bullet head, 5.50mm shoulder step
  • No loose fit, no wobble — seats tight with a light tap
Close-up dimension diagram of a 100 grain stainless target point showing 6.00mm head 5.50mm shoulder and 4.20mm grooved tail
4.20mm
Shaft ID
303
Stainless
3
Weights
12
Per Pack
Twelve stainless steel target points arranged in a frame, eight standing around the edges and four crossed in the center on white background
03 — Precision Steel

True to Weight, Shot After Shot

CNC-turned from 303 stainless — denser and stiffer than plated brass, won't bend in a foam bag, won't rust at the range. Weight-matched within a tight tolerance so every arrow in your set flies the same.

  • 303 stainless — high density, non-corrosive
  • Consistent weight per pack, no balancing surprises
  • Twelve per pack — enough for a full quiver plus spares
Specifications
Product Specifications
Product
Stainless Steel Target Points (Insert Type)
Material
303 stainless steel
Fits Shaft ID
4.20mm (.165")
Weights
80 gr (48.5mm) · 100 gr (54.7mm) · 120 gr (66.9mm)
Head / Shoulder / Tail
6.00mm / 5.50mm / 4.20mm
Pack
12 points
Best For
Use
Target archery, 3D practice, field points
Shafts
ID 4.20mm carbon, fiberglass, aluminum, wood
Bows
Compound · recurve · longbow
FAQ

Do these fit my arrows?

These are press-fit insert points for arrows with a 4.20mm inner diameter. Measure your shaft ID before ordering — if your shaft is .244" (6.20mm) or another size, these won't fit.

How do I install them?

No glue needed — the grooved tail presses into the shaft ID. Deburr the shaft, then tap the point in with a plastic mallet or press until the shoulder seats. Remove by pulling with a point puller.

How does the cut-to-weight work?

The tail has scored grooves. Each section is roughly 10 grains. Snip one section off to drop ~10 grains and fine-tune your total arrow weight. Cut after weighing, in small steps.

Can I get other weights or bulk?

80, 100, and 120 grain are in stock now. Other weights, larger packs, and OEM branding are available on bulk orders — contact us with your specs.

303 stainless points, 80/100/120 grain, 12 per pack.

Precision-machined for ID 4.20mm shafts, cut-to-weight tail. Contact us for bulk or custom weights.

View full details