1 6

Hosolee

Archery Points 80/100/120/150 Grain Insert Arrowheads for ID 4.20mm/0.204inch Arrows Shafts

Archery Points 80/100/120/150 Grain Insert Arrowheads for ID 4.20mm/0.204inch Arrows Shafts

$0.83 USD
$0.83 USD
Sale Sold out
重量
Product Information 4.20mm Bullet Field Points · Break-Off Tunable · 12 Pack

Bullet-shaped field points machined from SUS303 stainless steel, sized for 4.20mm inside-diameter shafts. Tapered tip pulls free clean from foam and cardboard, and the two break-off weight sections let you fine-tune front-of-center without buying a new set. 80, 100, 120 or 150 grain — twelve per pack.

Three SUS303 stainless steel bullet field points crossed on white background, showing tapered tip and ringed insert tail
SUS303 stainless · bullet shape · 4.20mm ID · 12 pack
Diagram of bullet field point showing OD 5.80mm at shaft, ID 4.20mm fit, 100 grain weight and 2.32 inch length
01 — SUS303 Precision

Stainless, Not Plated

Machined from solid SUS303 stainless — not a cheap carbon steel point with a nickel coat that scratches and rusts. Consistent weight, straight shank, clean taper.

  • Fits ID 4.20mm shafts, OD 5.80mm at shoulder
  • Ringed shank — glues in tight, no wobble
  • Bullet taper — punches clean, pulls out easy
02 — Break-Off Tuning

Trim the Tail, Dial the Weight

Two detachable 10-grain weight sections on the tail. Snap or cut a section off to step the point down in 10 grain increments while you tune broadhead flight — no re-buying points.

  • Base weights: 80 · 100 · 120 · 150 grain
  • Trim each 10 gr tail section for fine tuning
  • Match spine, draw weight and arrow length
Four bullet field points of graduated lengths laid horizontally showing 80 100 120 and 150 grain weight options
80–150
Grains
4.2mm
Shaft ID
SUS303
Stainless
12
Per Pack
03 — Pulls Free Easy

Bullet Nose, Fewer Broken Arrows

Five stainless bullet field points laid diagonally showing precision machined taper and ringed insert shank
  • Tapered bullet nose — slides into foam and cardboard without splitting
  • Consistent weight ±0.5 grain for tuned groups
  • Glue-in type — fits 4.20mm ID carbon shafts, field and 3D
Specifications
Product Specifications
Product
Bullet field points, glue-in
Material
SUS303 stainless steel, precision machined
Shaft fit
ID 4.20mm shafts, OD 5.80mm at shoulder
Weights
80 · 100 · 120 · 150 grain
Tuning
Two break-off 10 gr sections on tail
Pack
12 pieces
Best For
Bows
Compound · recurve · longbow
Use
Field target · 3D · foam · cardboard · paper
Why bullet shape
Cleaner punch, easier pull, less target wear
FAQ

How do I glue them in?

Lightly sand the ringed shank, deburr the shaft ID, then bed with CA or epoxy. The ring grooves lock the point straight.

How do the break-off sections work?

Each scored tail section is ~10 grains. Snap or cut one off to step the weight down while tuning; after trimming, shorten the shaft accordingly and re-bed.

Can I shoot broadheads with these as a practice tip?

Yes — match the base weight to your broadhead grain, trim the tail to land on the same total FOC, and your field groups will mirror your broadhead groups.

Other sizes or bulk?

Other shaft fits, weights and larger packs are available. Contact us for OEM and bulk quotes.

SUS303 bullet field points, break-off tunable. 12 per pack.

80 / 100 / 120 / 150 grain. Contact us for other shaft fits, weights or bulk pricing.

View full details