Hosolee
Archery Fletching Jig with Straight and Right Helical Clamps Vanes Feathers Sticker Tool for DIY Arrow
Archery Fletching Jig with Straight and Right Helical Clamps Vanes Feathers Sticker Tool for DIY Arrow
Couldn't load pickup availability
A compact green fletching jig that glues vanes or feathers dead-center on any arrow shaft. Two clamps in the box — straight and right helical — click 30° per adjustment, switch between 3-vane (120°) and 4-vane (90°) setups, and fletch a full dozen arrows in an afternoon.


Straight & Right Helical, Both Included
One jig, two heads. The straight clamp lines vanes up flat on the shaft for target practice; the right-helical clamp spins your arrows clockwise for field stability and broadhead accuracy.
- Straight clamp — clean, flat, low-drag target fletch
- Right-helical clamp — clockwise spin, tighter groups
- Scale marks on the clamp for repeatable placement
120° or 90°, Your Choice
The rotating dial clicks 30° at a time, so you can set the jig for three vanes at 120° (target / 3D) or four vanes at 90° (hunting / broadhead). No measuring, no guesswork.
- 3-vane at 120° — balance, stabilization, accuracy
- 4-vane at 90° — speed, straight flight, wind resistance
- 30° per click — repeatable angle every arrow


Magnetic Clamp, Fits Up to 10 mm OD
Two strong magnets hold the clamp firmly against the jig base while the glue cures — no slipping, no misalignment. The shaft channel accepts arrows up to 10 mm outer diameter.
- Magnetic clamp holds steady while glue dries
- Fits shafts up to 10 mm OD
- Rugged green plastic, dirt-resistant and impact-tough
Works On Every Shaft, Every Fletching
Carbon, fiberglass, aluminum, or wood — the channel cradles them all. Crossbow bolts fit too. Re-fletch your hunting set, build a target practice dozen, or turn bare shafts into custom arrows in a single afternoon.
- Carbon · fiberglass · aluminum · wood shafts
- Plastic vanes · real feathers
- Vertical bow arrows · crossbow bolts
Everything You Need To Start Fletching

Full jig set, white background

Jig base + two clamps
The Details

Arrow loaded in the jig

Apply glue and press vane
Carry to the range
Product Specifications
Package & Use
FAQ
Straight or helical — which should I use?
Straight fletching gives the cleanest flight for target and field points. Helical spins the arrow for stability in wind and better broadhead flight. The jig ships with both clamps, so you can run either.
How many vanes per arrow does it support?
Three vanes at 120° or four vanes at 90°. The rotary dial clicks 30° at a time, so you can index either layout repeatably.
Will it fit my arrow shaft?
The channel accepts shafts up to 10 mm outer diameter — covers carbon, fiberglass, aluminum and wood arrows, plus crossbow bolts.
Does it work with real feathers?
Yes. The clamp holds both plastic vanes and real feathers flat against the shaft while the glue cures.
Start fletching your own arrows today
Two clamps, 30° clicks, magnetic hold. Grab it on Amazon, or contact us for OEM colors and bulk.
Share
