1 5

Hosolee

Archery Aluminum Inserts with OD 7.40mm for ID 6.20mm/.244inch Arrows Shafts

Archery Aluminum Inserts with OD 7.40mm for ID 6.20mm/.244inch Arrows Shafts

$0.22 USD
$0.22 USD $0.22 USD
Sale Sold out
Product Information Aluminum Arrow Inserts · OD 7.40 mm · 72 Pack
View on Amazon · ASIN B0BD4VPQFX
View Listing

High-strength aluminum inserts for 6.20 mm / .244 inch ID arrow shafts. The knurled exterior grips the epoxy inside the shaft, and the threaded front end takes standard screw-in field points or broadheads. 72 per pack — enough to build a full dozen arrows with spares.

Three silver aluminum arrow inserts standing upright and three lying down on white, showing the knurled embossed texture and threaded interior
Aluminum inserts · OD 7.40 mm · for 6.20 mm / .244" ID shafts
Single silver aluminum insert standing upright showing full knurled diamond-pattern texture from threaded top to base flange
01 — Knurled Grip

Embossed Surface Locks the Glue

The outer wall is embossed with an aluminum knurl pattern. When epoxy cures around the ridges, the insert can't spin or pull out — even on hard impacts or broadhead builds.

  • Knurled OD — extra glue-to-wall contact
  • No spinning, no pull-out on impact
  • High-strength aluminum alloy build
02 — Threaded Front

Swap Points or Broadheads in Seconds

The front end is pre-threaded to standard arrow-point spec. Screw in field points for the range, swap to broadheads for hunting — no epoxy on the point itself.

  • Standard thread — fits most screw-in points & broadheads
  • Switch between target and hunting setups on the same shaft
  • No glue on the point — clean swap
Angled close-up of silver aluminum insert showing the threaded interior hole and knurled diamond pattern on white background
One large aluminum insert on the left and 35 smaller inserts arranged in a neat grid on white background, showing 72 pack bulk quantity
03 — Bulk Value

72 Inserts per Pack

Build two full dozen arrows, plus spares for broken shafts or rebuilds. Consistent dimensions across the pack — same OD, same length, same thread.

  • 72 per pack — enough for 6+ dozen arrows
  • Consistent OD 7.40 mm across every insert
  • Easy to carry, easy to install in the field
Six silver aluminum inserts lined up diagonally, all showing threaded interior holes and consistent knurled texture on white background

Consistent OD 7.40 mm · uniform thread · pack after pack

7.40 mm
Outer Diameter
6.20 mm
Shaft ID
0.855"
Insert Length
72 pcs
Per Pack
Specifications
Product Specifications
Product
Arrow Inserts
Material
Aluminum alloy
Outer Diameter
7.40 mm
Shaft ID Fit
6.20 mm / .244 inch
Length
0.855 inch / ~21.7 mm
Pack
72 inserts
Installation & Use
Shaft Types
Carbon · fiberglass · wood · aluminum (6.20 mm ID)
Compatible Points
Standard screw-in field points · broadheads
Installation
Rough-fit, then glue in with arrow epoxy. Knurled wall grips the cured bond.
FAQ

How do I check if these fit my arrows?

Measure the inner diameter of your shaft. These inserts are OD 7.40 mm — they press into shafts with 6.20 mm / .244 inch ID.

Do I need epoxy to install them?

Yes. Dry-fit first, then bond with arrow epoxy or CA glue. The knurled wall gives the cured adhesive extra grip so the insert won't spin or pull out.

What thread size are the points?

Standard arrow-point thread — works with most screw-in field points and broadheads on the market.

Can I get custom packaging or OEM?

Yes — contact us for bulk orders, custom branding, or OEM packaging on larger runs.

72 inserts. Ready to build.

Aluminum alloy, OD 7.40 mm, knurled grip, threaded front. Grab it on Amazon, or contact us for OEM.

View full details