3D Skunk Archery Target — Self-Healing PE Foam Shooter

3D Skunk Archery Target — Self-Healing PE Foam Shooter

Best Seller · 3D Archery Target 3D Archery Targets · Small Game

3D Skunk Archery Target — Self-Healing PE Foam Shooter

Near life-size skunk. Painted scoring ring. PE foam that closes behind every arrow.

A 3D skunk moulded from quality PE foam — not a flat silhouette. Black body, twin white stripes, bushy tail, painted bullseye on the flank. Roughly 90% of a live animal, about 1.5 kg, two ground stakes in the box.

  • One-piece moulded body — nothing to assemble
  • Self-healing foam: pull arrow, hole closes
  • Painted scoring ring (white / blue / red)
  • Works with compound, recurve and crossbow
At a glance
  • MaterialPE foam
  • Height (to tail tip)15.7 in / 40 cm
  • Length (nose to tail)17.5 in / 44.5 cm
  • Weight~1.5 kg
  • Ground stakes2 × 14 cm
Buy from hosolee.net Buy on Amazon
3D Skunk archery target studio shot with dimensions 15.74 inch height and 17.51 inch length
Studio — 15.7 in to the tail tip, 17.5 in nose to tail base.
Clean side profile of the 3D skunk target on white background
Side profile — one-piece body, stripe runs from nape onto the tail.
Four-panel close-up showing arrow penetration and self-healing closure in PE foam
Self-healing — arrow in, pull out, puncture closes.
3D skunk target set among tall wild grass
In the weeds — reads as a small game animal at range.
Archer in camouflage crouching beside the skunk target
Real-field size — crouched archer for scale.
Archer holding the skunk target with two ground stakes visible
Handling — lifts out with stakes attached; 5.5 in ground clearance.
Scale diagram comparing archer, real skunk and 3D target
Scale reference — archer (68.9 in), live skunk (17.7×19.7 in), target (15.4×17.3 in).
01 / 07 02 / 07 03 / 07 04 / 07 05 / 07 06 / 07 07 / 07
PE foamSelf-healing · UV resistant
15.7 inHeight to tail tip
17.5 inNose to tail base
~1.5 kgLight enough to carry
01 — Why this 3D target sells

More than a foam block

Budget 3D targets are flat silhouettes with a ring printed on cardboard. This skunk is moulded as one piece — stripes, tail and all — with a painted bullseye on the flank. Roughly 90% of a live animal.

01

Painted scoring ring

White outer, blue middle, red bullseye. A real aiming point from shot one — not a guess.

02

Near life-size

~90% of a live skunk. Honest aiming at hunting distances, light enough to move.

03

One-piece moulding

Body, feet, tail in a single mould. Nothing to bolt, glue or adjust.

Lawn ornament between shoots, 3D target on the range. One object, two jobs.

02 — Material

PE foam: stops the arrow, lets it go

Firm skin, soft core. Stops crossbow bolts and recurve arrows alike — but releases the shaft with one hand.

  • Self-healing punctures
  • Excellent stopping power
  • Unrivalled UV resistance
  • Corrosion & heat resistant
PEFoam construction
Stop + releaseCrossbow to recurve
Self-healingHole closes after shot
UV ratedSeason after season
03 — Size and scale

Close to life-size, light to move

15.7 in tall, 17.5 in long, ~1.5 kg. A live skunk is ~17.7 × 19.7 in — so this is roughly 90% scale.

Target length 17.5 in Real skunk length 19.7 in Target height (tail tip) 15.7 in / 40 cm Real skunk height 17.7 in Drawn to the same scale. ~90% of a live skunk — not a toy, not a half-scale silhouette.

Height measured to tail tip. Length nose to tail base. Two 14 cm metal stakes included.

04 — Who it's for

Scales with you

01

Beginners

Painted bullseye at 10–20 yards. Forgiving foam, arrows pull out easy. No frustration.

02

3D league shooters

Realistic pose, self-healing body. Takes a full day of group shooting on a walk-through course.

03

Small-game hunters

Practice the stalking shot at backyard distances. Trains you to pick a small vitals zone.

In the box

  • 3D Skunk target body1
  • Ground stakes, 14 cm metal2
  • MaterialPE foam
  • Approx. weight1.5 kg

Works with

  • Compound bows
  • Recurve and longbows
  • Crossbows (field points)
  • Backyard, range & 3D course
  • Garden display when idle
05 — Specifications

Full specs

Measured on the standing target, including the raised tail.
Product 3D Skunk Archery Target
Material PE foam, firm skin / soft core
Colour Black body, white stripes; painted ring
Height to tail tip 15.7 in / 40 cm
Length nose to tail 17.5 in / 44.5 cm
Ground clearance 5.5 in / 14 cm
Approx. weight 1.5 kg / 3.3 lb
Construction One-piece moulded, no assembly
Scoring ring Painted (white / blue / red)
Ground stakes 2 × 14 cm metal, included
UV resistance Unrivalled
Bow types Compound, recurve, crossbow

Quick answers

01

What arrows can I shoot?

Field points from compound, recurve, longbow and crossbow. Skip the broadheads — they shred the foam.

02

Is it really self-healing?

Yes. Pull the arrow, the hole closes. You won't shoot the same spot hundreds of times, but the ring stays shootable for a long time.

03

How does it compare to a real skunk?

Target: 15.7 × 17.5 in. Live skunk: ~17.7 × 19.7 in. Roughly 90% scale — honest distances without the bulk.

04

Will the stakes hold it in wind?

On level ground, yes. In strong gusts or hard soil, lean it against a tree or add a backstop.

05

Can I leave it outside?

Yes — UV resistant. Avoid standing water (it softens foam cores). Tip up after heavy rain.

06

Good for beginners and kids?

Very. Clear bullseye, forgiving foam, easy arrow pull. A common first 3D target.

07

hosolee.net or Amazon?

Same product. Our site has the full 3D range and OEM/ODM options. Amazon is fine if you prefer that checkout.

06 — Continue browsing

More 3D targets from hosolee.net

Get the 3D Skunk target

Self-healing PE foam · painted scoring ring · near life-size · 2 stakes included.

Buy on hosolee.net Buy on Amazon
Part of the 3D archery target range at hosolee.net. Also on Amazon.

Back to blog

Leave a comment